Zirconia implant restorations
Zirconia crowns and bridges on implants, fabricated from the dentist’s data and prescription with a CAD/CAM workflow.
Loading…
Premium Dental CAD/CAM Material
HD PLUS Ceramic Block Zirconia
Zirconia CAD/CAM blanks for labs and clinics — every box is traceable by LOT and has a genuine QR warranty card.
- Disc Ø 98 mm · 8 thicknesses 10–25 mm
- Shade A1 · A2 · A3
- Translucency 43% · Flexural strength ≥ 1200 MPa
- Certified CFS · ISO 13485:2016
- QR warranty card
- Traceable by LOT
- Six-component set
- Made in Ho Chi Minh City
Technical data
Technical details labs need to know
Composition and coefficient of thermal expansion from the instructions for use, plus the thickness sizes printed on the set label.
- ZrO₂ + HfO₂
- 94–95%Main component
- Y₂O₃
- 4.5–6.0%Al₂O₃ and other oxides: each below 0.5%
- Thermal expansion (CTE)
- 10 ± 0.5×10⁻⁶ K⁻¹Measured from 25 to 500 °C
- Blank thickness sizes
- 8sizes10 · 12 · 14 · 16 · 18 · 20 · 22 · 25 mm
As given in the instructions for use and on the HD PLUS packaging labels (DH5103 set). Firing program: follow the enclosed firing guide.
Ready for CAD/CAM
Mill with a CAD/CAM machine or by hand; the scaling factor is printed on the label so you design to the right size.
12-step workflow
The leaflet walks through fixing the blank, milling, staining and firing, up to the try-in.
For trained technicians
Used by trained technicians on the dentist’s prescription. Store dry, at room temperature.
Configure
Choose thickness, shade and blank type
Pick a configuration to see its SKU, REF and listing status. The disc illustration is indicative only.
Thickness (mm)
Ø98 mm disc, eight sizes from 10 to 25 mm. Use the arrow keys to change size.
Shade
Blank type
Blank type labels as printed on the box and label. Check the label, the box or ask us about the characteristics of each type.
Selected configuration
Ø98 mm · 14 mm · A2 · HT
Status: In the catalogue
Send a request for a quotation based on your quantity and needs.
- SKU
HDP-98-14-A2-HT- REF
- 53 6609 2614
- Price
- Contact us
Ø98 mm · 14 mm · A2 · HT. SKU: HDP-98-14-A2-HT. In the catalogue.
DH5103 product set
Six components in every HD PLUS box
Each set contains the box, the disc face, the warranty card, the inner label, the edge label and the leaflet. Select a component to see what it is for.
Select a component to highlight it on the diagram.
The outer packaging, printed with the brand, certifications and key specifications.
The Ø 98 mm zirconia disc, the part you mill restorations from.
The genuine HD PLUS blank certificate card, with a QR code to verify it on the website.
Shows the REF, LOT, thickness sizes, date of manufacture, use-by date and the scaling factor for design.
A small label that repeats the REF, LOT and scaling factor for quick identification.
The 12-step instructions, material data and safety notes.
Dimensions follow the DH5103 packaging design.
- 0112 × 12 × 4 cm
Box
The outer packaging, printed with the brand, certifications and key specifications.
On this component
- HD PLUS Ceramic Block zirconia branding
- CFS and ISO 13485:2016 certifications
- Head office and factory addresses
- Tick boxes for shade, thickness and blank type, plus symbols for 43% translucency and flexural strength ≥ 1200 MPa
- 029.8 × 9.8 cm (Ø 98 mm)
Disc face
The Ø 98 mm zirconia disc, the part you mill restorations from.
On this component
- Zirconia disc, 98 mm in diameter
- Thickness 10–25 mm depending on the size
- HD PLUS identity with the CFS and ISO 13485:2016 marks on the face
- 038.6 × 5.4 cm
Warranty card
The genuine HD PLUS blank certificate card, with a QR code to verify it on the website.
On this component
- QR code and card code on the back (for example HD1234567)
- Hotline and the website for checking the card
- Details of the HD PLUS material factory
- A reminder to consult the treating dentist about correct use of the restoration or when warranty service is needed
- 048 × 5 cm
Inner label
Shows the REF, LOT, thickness sizes, date of manufacture, use-by date and the scaling factor for design.
On this component
- REF (Catalogue number) and LOT (Batch code)
- Thickness sizes: 10, 12, 14, 16, 18, 20, 22, 25 mm
- Date of manufacture, use-by date and scaling factor
- CFS and ISO 13485:2016 certifications
- 054 × 0.7 cm
Edge label
A small label that repeats the REF, LOT and scaling factor for quick identification.
On this component
- The REF and LOT of the lot
- Scaling factor (SF)
- HD PLUS identity and the CFS mark
- 0611 × 11 cm
Instructions for use
The 12-step instructions, material data and safety notes.
On this component
- The 12-step workflow
- Chemical composition and coefficient of thermal expansion (CTE)
- Storage and estimated replacement period
- Adverse events and contraindications per the current document
- Original text in English
Dimensions follow the DH5103 packaging design.
Workflow
12 steps from blank to restoration
A summary of the HD PLUS instructions for use (IFU). Always follow the IFU enclosed in each box.
Milling and separating
Steps 1–3- Step 1
Fix the blank
Fix the blank in the dedicated clamping holder.
- Step 2
Mill
Start milling on a CAD/CAM machine or by manual milling.
When designing, enter the scaling factor printed on the inner label of the lot you are using.
- Step 3
Separate the framework
Separate the milled framework from the blank and rough-trim it with a diamond disc.
Cleaning and staining
Steps 4–5- Step 4
Remove the dust
Blow the dust off the framework with an air gun.
- Step 5
Stain and dry
Stain the framework with colouring liquid and dry it under an infrared lamp.
See the instructions for the colouring liquid.
Sintering
Steps 6–8- Step 6
Load the furnace
Place the framework in the furnace.
- Step 7
Sintering programme
Select the sintering programme and start sintering as described in the enclosed sintering instructions.
Do not apply the sintering parameters of other materials.
- Step 8
Cool down
Remove the framework when the furnace has cooled to room temperature.
Do not remove the framework while the furnace is still hot.
Finishing
Steps 9–12- Step 9
Check the fit
Check fit and margins on the working model; grind and polish if necessary.
- Step 10
Sandblast
Sandblast with 50 micron Al₂O₃ at 2–2.5 bar; clean with a brush and water.
Do not clean with steam.
- Step 11
Layer with porcelain
The framework is ready for veneering. Choose porcelain and glaze to finish the restoration.
- Step 12
Try-in
The restoration is ready for the try-in.
The choice and seating of the restoration remain the decision of the treating dentist.
Mill technology
Mill machine systems and the CAD/CAM workflow
Doan Huy continuously invests in advanced dental technology equipment and materials from countries such as Germany, Italy, Japan, Poland and Korea. Together with a dynamic, creative and eager-to-learn technician team, this equipment supports consistent quality in every restoration fabricated at the centre.
Equipment and materials from
- Germany
- Poland
- Italy
- South Korea
- Japan
Illustrative photoMill 4XMilling chamber of the Mill 4X system while cutting a zirconia blank. 
Illustrative photoMill 5XMilling chamber of the Mill 5X system while cutting a zirconia blank.
Fabrication services
Six zirconia CAD/CAM restoration categories
Metal-free restorations fabricated with CAD/CAM, built to the prescription and design agreed with the dentist.
Zirconia post & core
Zirconia cores made from the canal and prepared-tooth shape supplied by the dentist, supporting all-ceramic restorations.
Zirconia inlays / onlays
Zirconia inlays and onlays made to the cavity prepared by the dentist, rebuilding cusps with a metal-free material.
Porcelain veneers
Veneers made from the smile design and models supplied by the dentist, with control over shape, shade and thickness.
Full-contour zirconia
Restorations made entirely of zirconia with no porcelain layering on the outside; the full shape is designed and milled with CAD/CAM.
Layered zirconia crowns
A premium metal-free restoration built from two layers: a zirconia framework inside and an aesthetic porcelain layer outside.
Verify warranty card
Got an HD PLUS card? Check it in seconds
Enter the card number printed on the back, or scan the QR code with your phone, to see whether the restoration was made from genuine blocks and how long the warranty runs.
Scan the QR
Your phone camera reads the code on the back of the card.
Activate
The lab or clinic activates it when the restoration is placed.
Under warranty
The period counts from the activation date.
The QR code is on the back of the card — scan it with your phone camera
News
Knowledge & news from Doan Huy Dental Plus
Clinical articles on zirconia restorations, the CAD/CAM workflow and HD PLUS ceramic blocks.
Products
How to check a genuine HD PLUS warranty card with the QR code
Scan the QR code or enter the card number (HD plus 7 digits) on the website to see whether the card is not yet activated, under warranty, expired or revoked.
Contact
Tell us what your lab or clinic needs
Leave your name and phone number, or call the hotline directly — we will advise on HD PLUS and our zirconia fabrication services.
Hotline
Leave your details
We will get back to you.
Need a detailed quote or want to become a partner? Use the full form